Dear EasySMX team,
I have bought the SL-9111 controller (wired) and have connection problems.
When I start the PC (with the controller connected) I don't get it switched to XInput or DirectInput (not even by pressing the Mode button for 5 seconds). The control lamps for XInput (lamps 1 & 2) or DirectInput (lamps 1 & 3 or 1-3) do not light up.
This only works if I unplug the controller from the USB while the PC is running and then plug it in again. Then it is immediately on XInput (lamps 1 & 2 light up) and I can also switch to DirectInput (lamps 1 & 3 or 1-3 light up) with the mode button.
The controller is recognized by the PC in the game controller properties of Windows 10 after the start, but since it is neither set to XInput nor DirectInput (there is also no lamp for the mode display) I cannot use the controller in any game. I have to remove the controller from the USB port and reinsert it EVERY TIME, otherwise I won't be able to go into XInput or DirectInput mode.
I have never had this problem with other controllers and it does not seem to be due to me / my PC because the controller is recognized, but the mode cannot be changed.
I hope you can help me with my problem and thank you in advance for your help.