1. With power on status, press and hold Home, Back&B buttons to enter calibration.

2. Turn the left and right joysticks clockwise three times and press the left and right triggers to the bottom three times at the same speed.

3. Place the desktop for three seconds to calibrate the gyroscope and then press B to exit.

Click here to watch calibration tutorial

Manual turbo：Press T+A for the first time； Hold down the A button for continuous trigger of A button

Automatic TURBO：Press T+A for the second time; Press the A button once for automatic continuous firing.

Disable TURBO: Press T+A for the third time.

【Note1】Turbo+Back button reduces the auto-fire speed; Turbo+Start button increases the auto-fire speed.

【Note2】Press and hold the Turbo button for 5 seconds to clear the Turbo function for all buttons.

Please poke the reset button at the back of the controller to restart the controller.

a.Receiver Connection

1. Plug the wireless receiver into a USB port on your computer, switch the

back mode toggle button to the wireless receiver mode,

2. Then press the Home button briefly to power on. The controller's indicator light will

flash slowly.

3. When the light becomes solid, the controller will vibrate briefly ,indicating a successful connection.

【Note】 If the controller does not pair with the receiver, you need to force pairing as follows: Plug the USB receiver into the computer's USB port, poke the small hole on the receiver, the receiver LED will flash quickly. Then, with the controller turned off, press and hold the Home button for 3 seconds to turn on the controller. The controller LED will flash quickly. When the controller LED turns solid, the controller will vibrate briefly, indicating a successful pairing.

b.BT Connection

1. Switch the back toggle button to the Bluetooth mode BT.

2. Long-press the HOME button for 3 seconds to power on the controller. The

controller's indicator light will flash quickly. 

3. Open your device's Bluetooth settings and find ""Xbox Wireless Controller"" to pair. When the

indicator light becomes solid, the controller will vibrate briefly, indicating a successful pairing.

Subsequent Connections:

Switch the back toggle button to the Bluetooth mode. Press the Home button briefly to power on the controller for reconnection.

c.Wired Connection:

Switch the back toggle button to the wired mode. Connect the controller to your device using a data cable. When the indicator light becomes solid, the controller will vibrate briefly, indicating a successful connection.

d.NS Connection

In dongle mode/Wired mode/Bluetooth mode, press and hold the 'B'& 'S' buttons simultaneously for 3 seconds to switch between X-input mode (blue light) and D-input mode (yellow light).When the switch is successful, the controller will vibrate briefly.

a.Set

1. When the controller is successfully connected,press and hold the Settings button for 3 seconds. The indicator light will flash quickly, indicating programming mode. 

2. Press the M1 button once, then press the button you want to program (e.g., A or AB

3. Finally press the Settings button again. The indicator light will become solid, and the controller will vibrate briefly,indicating successful programming.

【Note】Press and hold the Settings button for 5 seconds to clear all programmed functions.

b.Check Programmable Back Buttons

1. Open the testing interface, with the controller connected, hold the Settings button for 3 seconds until the LED turns green

2. Press the M1 button, then press A; Press the M2 button, then press B

3. Quick-press the Settings button to save

4. Now when you press: M1 should perform the A button action; M2 should perform the B button action

If they work as expected, your buttons are functioning normally

1. Connect Controller to PC 

Use USB cable or Bluetooth to link your controller to your computer.

2. Open the EasySMX App

3. Tap ""Add Settings"" in the app. The app will automatically redirect you to your phone’s Bluetooth settings.

Look for and select ""QMacro"" in the available devices list.

4. Return to the EasySMX App, it should now show ""Connected"".

1. Press and hold the S& B &Home buttons simultaneously for 5 seconds

2. The controller’s LED will blink once to indicate a successful reset.