1. Under the power-on condition, press the ‘X “, ”-’ & ‘+’ buttons at the same time, the indicator lights 1 &2 flash alternately.

2. Turn the left and right joysticks clockwise three times at a constant speed, and press the left and right triggers three times at a constant speed. 

3. Finally press ‘+’ button to exit.

Click here to watch calibration tutorial

You need to upgrade the firmware as follows:

1. Click on the upgrade package in the attachment,

2.Turn off the controller,then press and hold L3 ,using the data cable to connect to the controller on the PC, 

3.When upgrade package recognise successfully, click it and wait it.

Manual：Press T+A the first time； Hold down the A button for continuous trigger of A button

Automatic TURBO：Press T+A for the second time; Press the A button once for automatic continuous firing of A button.

Disable TURBO:Press T+A for the third time
【Note】Press and hold the Turbo button for 5 seconds to clear the turbo function for all buttons.

If firmware update fails and the controller won't turn on, Please poke the reset button at the back of the controller to restart it.

a.2.4G Reciver For PC

1. Insert the receiver into the USB port of the PC;

2.With the controller powered off ，Click the HOME button, the

controller LED indicators will flash, indicating that it has entered

pairing mode;

3. The LED indicators (LED2+LED3+LED4) will remain on, indicating

that the connection is successful.

【Note】If the controller fails to pair with the receiver,you can

perform a forced pairing.

1). Insert the receiver into a USB port on your computer, press the

button on the receiver once briefly (it will flash quickly),

2). Then power on the controller by pressing and holding the Home

button for 3 seconds.

The controller's LED indicators will flash quickly, and when they

become solid,the controller will vibrate briefly,indicating a successful

pairing.

b.Wired connection PC

Wired Connect the controller to the computer's USB port using a data

cable.The LED indicators (LED1+LED4) will remain on, indicating that

the connection is successful.

c.Bluetooth connect for PC/IOS Phone/Android Phone

1.Find the Bluetooth in computer Setting menu --""Add Bluetooth or Other Devices""page.

2.With the controller powered off, long press the""X""and“HOME""buttons for3 seconds until the led indicator (LED1+LED4) flash,then release to enter pairing mode.

3.In the computer's Bluetooth settings, search for""Xbox Wireless Controller""for pairing and connection.The LED indicators (LED1+LED4) will remain on,indicating that the connection is successful.

【Note】If the pairing fails the first time, delete the pairing name and try pairing again.

d.Connect to PC in Switch mode

e.Connect to Switch

f.Connect to Android devices

g.Connect to iOS devices

When connecting to a PC through the 2.4G USB receiver, you can switch mode between xinput/switch/dinput modes by long-pressing the ""-"" & ""+"" keys for 6 seconds.

a.Set

1. Click the Programming Button, controller enters programming mode when the led 2 and led 3 light up; 

2. Then press the M1 button once and then press the desired programmed button such as A or AB button,then press M1 again to save the settings successfully.

b.Disable

1. Connect your controller to your device (via USB or Bluetooth)

2. Press and hold the Macro Settings button M1 or M2. LED2 and LED3 will light up solid (indicating programming mode)

3. Press the M1 or M2 button you wish to disable twice

This will clear the button's function

1. Check Battery Level

If the battery is critically low, RGB lighting may automatically disable.

2. Verify Physical Switch

Locate the RGB toggle switch on the back of your controller. Ensure it's in the ""ON"" position.

3. Adjust Brightness Settings

The lighting might be set to minimum brightness: Hold and press the ""–"" button . While holding, move the Left Stick (L3) Up/Down:

↑ Increases brightness (0→5 levels)

↓ Decreases brightness

Release the buttons when desired brightness is set.

1 x EasySMX X15 gamepad

1 x USB data cable

1 x 2.4G receiver

1 x Instruction manual