Questions about EasySMX® D05 Controller

FAQ

Manuals

Drivers

Ⅰ.FAQ 

Q1:How to Calibrate the Controller?

1. In the power-off status, press and hold the BACK button, X button, and Home button simultaneously for 2 seconds to power on. The indicator light will alternate between red and blue, indicating entry into manual calibration mode.
2. Joystick calibration: Rotate the left and right joysticks fully in both directions for three complete cycles.
3. Trigger calibration: Press and hold the LT button and RT button fully three times each.
4. Finally, press the START button once to complete calibration and automatically power off.

Q2:How to Update?


1. Double-click the upgrade file to open the upgrade tool.

2. Press and hold the Left Stick (L3) and keep it held down.

3. While holding L3, connect the controller to your PC via USB cable

4. Click ""Upgrade"" in the software interface. Wait for the progress bar to complete (do not disconnect during this process).

5. Once upgraded, power on the controller. Hold the C button for 5 seconds to restore factory settings (LED will blink to confirm).

Q3:How to Connect to Different Devices

a.Receiver Mode

1. Insert the USB receiver into the charging dock's USB port.

2. Press and hold theB button&Home button for 3 seconds to

enter pairing mode.

3. The indicator on D05 controller's logo will flash rapidly. When it

turns solid,and the controller vibrates briefly,the connection is

successful.

【Note】The receiver will only connect to PC when the charging

dock is plugged into the PC.If the dock is not connected to the

PC,insert the receiver directly into the PC's USB port.


b.Bluetooth Mode

1. Press and hold theX button &Home button for 3 seconds to enter

pairing mode.

2. The indicator on D05 controller’s logo will flash rapidly. On your device

open Bluetooth settings and select Xbox Wireless Controller to pair.

3. When the light turns solid and the controller vibrates briefly，the

pairing is successful.

【Note】This method is suitable for PC,iOS,and Android Bluetooth connections.


c.Switch Mode

1. Press and hold the Y button &Home button for3 seconds to enter pairing mode.

2. On the Switch, go to Controllers> Change Grip/Order to

initiate pairing.

3. Once the light turns solid and the controller vibrates briefly, pairing is successful.

【Note】The Fn button triggers the screenshot function in Switch mode when pressed without a combo.


d.Auto Reconnection

If the device and connection mode remain unchanged,short-press
the Home button to automatically reconnect to the last device.

Q4:Mode Switching

In receiver or wired mode,the controller defaults toX-INPUT mode.

To Switch to D-input mode,hold BACK&START for 5 seconds.

To switch to Switch Mode,hold BACK&START for 5 seconds again. 

A brief vibration confirms the successful mode switch.The controller cycles through three modes:X-INPUT,

D-input,and SwitchMode.

Q5:Factory Reset

While the controller is off, press and hold L3+R3, then press the HOME button for 1 second to power on.

The controller will vibrate at 0.5-second intervals, then power off.This indicates the factory reset was successful.

Q6:What's In The Box

1 x EasySMX D05 gamepad

1 x Charging Dock

1 x USB data cable

1 x 2.4G receiver

1 x Instruction manual

Ⅱ.Manuals

Ⅲ.Drivers

c.Testing Tools

To help you quickly check if your controller is working properly, we recommend the following testing tools for different devices:

i.For PC

ii.For Android Phones & Tablets (International Version)
Please download and install the app Game Controller Tester from Google Play to your device, then run it to test your controller.

iii.For iOS Devices
You have two options:
Download the Controller app from the App Store to your device, then use it for testing.